Sulfaxil Binder 370 A
Description
Sulfaxil Binder 370 A is a thermally cross linkable binder for Sulphur printing and it has a very slight effect on the viscosity of synthetic thickeners.
Specification
Appearance
Low viscosity liquid with product specific odour
Chemical character
Polyacrylate and anionic surfactants in water
pH-Value (20°C)
approximately 8 (undiluted)
Miscibility
Miscible with water in all proportions
Application Technique
Available on request
Material Safety Data Sheet
Available on request
Storage
Sulfaxil Binder 370 A can be stored in the original sealed containers at temperatures between 5°C and 35°C for up to 12 months. Once containers have been opened, the contents should be used up as soon as possible. Containers should be properly closed after use because the product tends to form a skin on exposure to air. Protect from frost during storage. Protect from temperatures above 40 C. Stir before use.
Appearance
Low viscosity liquid with product specific odour
Chemical character
Polyacrylate and anionic surfactants in water
pH-Value (20°C)
approximately 8 (undiluted)
Miscibility
Miscible with water in all proportions
Storage
Sulfaxil Binder 370 A can be stored in the original sealed containers at temperatures between 5 C and 35 C for up to 12 months. Once containers have been opened, the contents should be used up as soon as possible. Containers should be properly closed after use because the product tends to form a skin on exposure to air. Protect from frost during storage; Protect from temperatures above 40 C. Stir before use
Application Technique
Available on requests
Material Safety Data Sheet
Available on request
Sulfast © . All Rights Reserved.